Skip to content
Products

Membranes and Modules

Reverse osmosis membranes and ultrafiltration modules; supply, replacement and recommissioning.

The membrane is the heart of a treatment line and its most expensive consumable. Its service life depends largely on how well the stages ahead of it perform — chlorine, hardness and colloidal load all accumulate directly on the membrane.

We work brand-independently on reverse osmosis membranes and ultrafiltration modules; we select what suits your existing system and carry out both the replacement and the recommissioning that follows.

Product group

  • Reverse osmosis membranes

    Reverse osmosis membranes

    Spiral-wound RO membranes. Selection follows the raw water analysis, the target conductivity and the array configuration; our active projects use 8" membranes.

  • Ultrafiltration modules

    Ultrafiltration modules

    UF modules that retain suspended solids and microorganisms at low pressure. With high chlorine tolerance and a backwashable construction, they form a protective stage ahead of reverse osmosis.

  • Pressure vessels and fittings

    Pressure vessels and fittings

    Membrane vessels, end caps, seals and connection equipment. These are checked together during a membrane replacement; a worn seal puts the new membrane at risk too.

Find the cause before replacing the membrane

Replacing a membrane whose performance has fallen does not solve the problem, it only postpones it. The same pretreatment, the same operating conditions and the same chemical regime will bring a new membrane to the same point before long.

That is why we treat membrane replacement not as a standalone consumable job but as part of a system analysis: trends in differential pressure, conductivity and flow usually point clearly to the cause of the damage.

Frequently asked questions

How long does a membrane last?

Quoting a single figure would be misleading; service life depends on raw water quality, the performance of the pretreatment and the cleaning discipline. Periodic inspection data indicates the replacement window in advance.

Can a different brand of membrane be fitted?

Yes, as long as it suits the array configuration and the vessel dimensions. We work brand-independently.

Do you handle recommissioning after replacement?

Yes. A membrane replacement is completed with recommissioning; otherwise the system does not run on the correct settings.

Send us your raw water analysis and the flow rate you need

Let us size the system together; we will survey the site in person if needed.