High-recovery industrial reverse osmosis units for process and boiler feedwater.
Reverse osmosis pushes raw water through a semi-permeable membrane under pressure and splits it in two: permeate and concentrate. It is used in every industrial process that needs water of low conductivity.
We engineer the system around your raw water analysis, manufacture it, commission it and inspect it periodically. Our active projects run units in the 9–60 m³/h range.
Well, mains or returned process water is taken into the system.
Suspended solids and chlorine are removed; this is the stage that determines membrane life.
Provides the pressure the membrane needs. The largest energy item in the system.
Permeate goes to the process; concentrate is routed to discharge or to recovery.
Low-conductivity water for production lines.
Feedwater that reduces the risk of scaling and corrosion.
Make-up water that raises the cooling tower’s cycles of concentration.
Reuse of treated water within the plant.
Replacement of 48 × 8" membranes and recommissioning of the system
All projects →The most common mistake in reverse osmosis projects is underestimating the pretreatment. When suspended solids, hardness and chlorine reach the membrane directly, capacity falls quickly and membrane life is cut short.
That is why we never engineer an RO unit on its own; we design it as a line, together with filtration and, where needed, softening.
We select the most suitable product according to the raw water analysis; a brand change is possible on existing systems.
When the recovery rate and the permeate quality begin to fall. Periodic inspection data indicates the replacement window in advance.
On the raw water analysis, the membrane array and the pretreatment. Our efficiency calculation weighs all three together.
Yes. We work brand-independently; membrane replacement and recommissioning are carried out on your existing system.
Resin softeners for hardness removal; resin replacement and regeneration tuning.
View →Complete system delivery with filter face piping, control panel and field installation.
View →Bottom-sweep collectors and filtration lines for cooling tower basins.
View →Let us size the system together; we will survey the site in person if needed.
